Wood floor gap filling
Wood floor gap filling methods
Gaps in wood flooring are caused by the long-term expansion and contraction of the wood. Although significant gaps in relatively new wood flooring are relatively uncommon along the lengths of the board, you may find that newer floors develop gaps at the ends of the boards. Old floors on the other hand are likely to have gaps, both along the lengths of the boards as well as at the ends, due to the years and years of expansion and contraction the floor will have faced. Shrinkage in floors is more common with solid wood floors, than engineered flooring.
We are using three main methods of filling flooring gaps :
Dust & Resin mix
If the floor is being sanded, perhaps the best way to fill the gaps between planks or parquet is to use a dust and resin mixture. In this method the fine dust which is generated during the sanding process is mixed with a resin compound to form a paste. This paste can be worked into the gaps and then allowed to dry before the floor area is re-sanded. The benefit of this method is the exact match concerning the flooring colour. This is the least effective way as it can easily crack and fall out, however this method is least costly than others.
Reclaimed wood slivers
These are pre-cut strips and angled at each end from 0mm – 6mm or 0mm-8mm . Mostly used on Victorian pine floorboards when there is a problem with draughts coming up from a cellar or, simply, if it makes the floor more aesthetically pleasing. Each sliver is covered with PVA wood adhesive and hammered into the existing gap , left to dry and then the excess wood is chiselled away before the sanding and finishing stage . This method guarantees that the filler will not pop out or drop down below the floor, because they will be able to rest on the joists too. What’s more, filler strips also create a very stable and attractive end result.
Colour match acrylic filler
The simplest way of filling gaps is using a colour match acrylic filler or mastic. This is an easy and quick product to apply and any excess can be wiped away easily. Essentially a mastic, this method is fast, efficient and doesn’t require sanding at the end. The biggest problem with this method is that it can be difficult to choose an acrylic colour which matches the colour of the wood perfectly.
- Commercial & Residential Flooring Specialists
- Dust Free Floor Sanding Equipment
- Prompt Project Completion
- Help Moving Furniture
- Skilled and experienced Flooring Craftsman
- Free Estimates & Consultation
- We do not charge VAT !
- Guaranteed workmanship
- All work insured
- Supply & Fitting of Hardwood Flooring
- Solid and Engineered Wood Floor
- Bespoke Designed Wood Flooring
- Wire Brushed Wood Floor & Lime Washed Floors On-Site Service Available
Oak parquet floor restoration in Godalming - Surrey
See our video - this herringbone pattern oak blocks were repaired partially, reglued down to the concrete subfloor. The gaps between the blocks were then filled using premixed fine dust from the sanding process to match best colour compare to existing oak blocks.more...
Oak floor renovation/restoration Surrey
This living room engineered oak floor was previously oiled. Read more about wood floor restoration in London - Surrey. The finish had unattractive deep orange hue after a few years of usage so our customer wanted a colour change for possible natural look of bare wood.more...
Engineered oak wide boards restoration in Claygate – Surrey
Our customer has asked us to refinish his beautiful oak floor with possible natural look and absolutely no sheen whatsoever.Read more about wood floor restoration in London - Surrey.
For the truly authentic and original look, we have decided use this time Bona Natural Traffic varnish.more...